IR Sender til IR System, multi sender

Wired Home's WHIREB IR emitter blaster has the ability to flood multiple components within a rack with IR control commands, reducing the clutter caused by attaching an emitter to each device to be controlled. At the same time, this reduces the number of emitter ports occupied on an IR hub, allowing for a single hub to be used over multiple zones. Each emitter blaster has been designed using a very deep purple plastic and easily disappears from view within a room; the peel-and-stick adhesive attaches to almost any surface for trouble-free, long lasting service. All IR commands between frequencies of 30-100 kHz are passed, ensuring compatibility with nearly every IR system and source component on the market. A 3.5 mm mono plug has been attached to the 10 ft. control cable for quick connection to a Wired Home hub such as the small WHIRH IR hub or WHIRDH wall plate IR hub. Specifications: • IR frequency bandwidth: 30-100 kHz • 10 ft. control cable • Dimensions: 1" H x 0.63" W x 0.375" D. Note: Wired Home IR hub, 12 VDC power supply, multi-conductor wire, and Wired Home target required for proper operation. Designed to be placed adjacent to equipment under control. Do not place directly on source components.